Pedal Preload Spacer kit for Logitech G27/G29/G920

Give your Throttle and Clutch pedal a firmer feel with this preload spacer kit.

Kit contains 2x spacers

1x 10mm
1x 6mm

We currently run the 10mm in the throttle pedal and the 6mm in the clutch giving a great improvement to the feel.
Remove the pedal plates
Remove the 14 silver screws from the underside
Remove the two bolts at each side of both the clutch and throttle
Pull back the black casing and lift off (this part is under tension) then remove the spring
Place the preload spacer into the recess
Replace the spring and re-assemble